Set the sampling depth for an I-AS autosampler.
Rinse Port
Set the depth to lower the probe at the position of the rinse port. To avoid any impact while you adjust the probe, set it to a small value (approx. 10mm). The maximum setting is 55.00mm.
Tray/Single
Set the depth to lower the probe in the sample vial or Single Sample Position. To avoid any impact while you adjust the probe, set it to a small value (approx. 10mm). The maximum setting is 63.75mm.
Standard/Rinse
Set the depth to lower the probe in the external bottle (for standard and cleaning fluid) position. To avoid any impact while you adjust the needle, set it to a small value (approx. 10mm). The maximum setting is 63.75mm.
[OK]
Applies the settings.
[Cancel]
Cancels the settings.