This dialog box is displayed when you double-click the Total Dil. column on the Batch Table pane. Calculates the dilution factor enters it in the Batch Table.
Final Weight or Volume
Enter the final weight or volume.
Sample Weight or Volume
Enter the sample weight or volume.
Dilution Multiplier
Enter the dilution multiplier.
Dilution Factor
Displays the dilution factor.
Autodilution
If the dilution factor is set in the acquisition method, do not change it.
Total Dilution
Displays the total dilution factor.
<OK>
Enters the calculated total dilution factor into the Total Dil. column of the Batch Table.
<Cancel>
Cancels the total dilution factor setting.
The Total Dil. column is not shown by default. To add the column, refer to “Adding/Removing columns“ under “Customizing columns“.
From MassHunter 5.2 or later, you can set the dilution factor even for samples with a sample type that is not "sample".