Select a way of tuning.
[Auto Tune]
Sets the autotune. Autotuning is completed successfully, the result is saved in the batch.
[Custom Tune]
Sets the semi-autotune. Select lens parameters to tune and then start the autotuning. It is also possible to adjust each tuning parameter manually with the slider or by changing the value.
[Override Hardware Settings]
This item is displayed when [Override Hardware Settings Function in Tune] is selected on the [Options] category in the [Settings] dialog box. Mark the check box to overwrite the hardware settings after tuning. For a special application, the result of the custom tuning is applied only to the batch.
[Signal Monitor]
While monitoring the signal, you can adjust all tune parameters. While the signal can be checked here, the manipulated tune parameters cannot be saved in the batch.
[Show Hardware Settings]
If this item is checked, all hardware setting values are displayed and can be changed. If the check box is selected, all hardware setting values are displayed and can be changed, and the [Sensitivity] Tab and [Resolution/Axis] Tab are displayed in the Real Time Display Graph in the Tune Modes Pane.
[OK]
Applies the settings.
[Cancel]
Cancels the settings.