[Instrument Configuration] dialog box

Select the module to use when Agilent LC or Agilent GC is selected for sample introduction.

Modules

Lists the available modules.

Configured Modules

Lists the modules already specified to be used.

[Add->]

Specifies that the module selected in the left list is to be used. The selected module moves from the left list to the right list.

[<-Remove]

Specifies that the module selected in the right list is not to be used. The selected module moves from the right list to the left list.

[Add All->>]

Specifies that all available modules are to be used. All modules move from the left list to the right list.

[<<-Remove All>>]

Specifies that all modules currently specified to be used are not to be used. All modules move from the right list to the left list.

[OK]

Applies the settings.

[Cancel]

Cancels the settings.

[Reset]

Returns all settings to the values they had when the dialog box was opened.

To Get Here

Click and select [Change Instrument Configuration] from the context menu on [Agilent LC] or [Agilent GC] in the Dashboard Pane.
Click and select [Properties] from the context menu on [Sample Introduction] in the Dashboard Pane, and then select [Agilent LC] or [Agilent GC] in [Sample Introduction].
Select [Agilent LC] or [Agilent GC] in [System] - [Hardware] - [Sample Introduction] - [Sample Introduction] in the [Settings] dialog box.