Specify the number of pumps and whether to use the valve when you use ISIS 2 for sample introduction.
#Pumps
Select the number of pumps connected to the ISIS 2.
Valve
Mark the check box to use the valve of ISIS 2.
Introduction mode
Select the introduction mode.
However, [Autodilution] cannot be selected in MassHunter 5.3 or later.
[OK]
Applies the settings.
[Cancel]
Cancels the settings.
Click and select [AVS Configuration] from the context menu on [Sample Introduction] in the Dashboard Pane.
Click and select [Properties] from the context menu on [Sample Introduction] in the Dashboard Pane, and then click [Edit] in [Introduction Mode].
Select [AVS] in [System] - [Hardware] - [Sample Introduction] - [Sample Introduction] in the [Settings] dialog box.