Nebulizer Test Pane
This section describes the functions in the Nebulizer Test pane.
Toolbar
Task Settings Toolbar
Drag 
to move the toolbar.
Starts the
Nebulizer Test. After the test, the result is displayed in the message
box.
Setup Table
Displays the horizontal and vertical positions for the torch. (For s-lens, the current value for the cool plasma is also displayed.)
[Parameter]
Displays the parameters.
[Appropriate Value]
Displays the appropriate values.
[Actual Value]
Displays the actual value. When the actual value is within the range
of the appropriate values, you can click the icon
to perform the test. If the actual value is not within the range of the
appropriate values, then adjust the argon gas tank pressure.
[Unit]
Displays the unit.
Context Menu
This section describes the commands that are available in the context menu, which is displayed when you right-click in the pane. The commands that are not listed below have the same function as their counterparts on the toolbars.
[Export Table]
Opens the [Export Table] (Entire Table) dialog box, which lets you export the entire table. This command is available when a pane that includes a table is selected.
[Print]
Opens the [Print] dialog box, which lets you print the contents of the selected pane.
To Get Here
- Click [Dashboard] from the [Hardware] group in the Task Navigator, and then select [Nebulizer Test] from the [Sample Introduction].
- Click [Nebulizer Test] from the [Hardware] group in the Task Navigator. If the menu is not currently displayed, select the [Sample Introduction] check box on the Dashboard Pane.