[FullQuant Outliers] dialog box
Outlier Type
Mark the check box for an Outlier Type to display it as an Outlier in the Batch Table.
- Calibration Curve Fit R
Outlier for the correlation coefficient of the calibration curve
- Relative Standard Error (%)
Outlier in the Relative Standard Error (%) of the calibration curve
- Relative Error (%)
Outlier in the Relative Error (%) of the calibration curve
- ISTD Recovery % [compared with CalBlk]
Outlier for the ISTD recovery by comparison with CalBlk
- Spike Recovery % [compared with SpikeRef]
Outlier for Spike recovery by comparison with SpikeRef
- QC Sample Conc Stability % [use 'QC1' Sample]
Outlier for the QC sample concentration stability of QC1 sample
- QC Sample Conc Stability % [use 'QC2' Sample]
Outlier for the QC sample concentration stability of QC2 sample
- QC Sample Conc Stability % [use 'QC3' Sample]
Outlier for the QC sample concentration stability of QC3 sample
- QC Sample Conc Stability % [use 'QC4' Sample]
Outlier for the QC sample concentration stability of the QC4 sample
- QC Sample Conc Stability % [use 'QC5' Sample]
Outlier for the QC sample concentration stability of the QC5 sample
- Count RSD %
Outlier for the count RSD % (relative standard deviation)
- Blank Conc Stability % [use 'BlkVrfy' Sample]
Outlier for the blank concentration stability of the blank sample
- Out of Calibration Curve Concentration Range
Outlier outside the concentration range of the calibration curve
Check All Outliers
Selects all Outlier Types.
<OK>
Applies the show/hide settings for the Outlier Types.
<Cancel>
Cancels the show/hide settings for the Outlier Types.
To Get Here
- For FullQuant Analysis, click
on the FQ Outlier
toolbar in the Batch
Table pane.