Displays the result of ramping the reaction gases and lets you set the gas flow rates.
The result of ramping the reaction gases can only be imported to a “RampCellGasResult.xlsx” file when Excel is installed. You can view and print the file using Excel. In the other cases, it can be imported to a “RampCellGasResult.csv” file. You can view and print the file using an application that can read CSV files.
He gas
Enter the He gas flow rate and click the [Apply] button.
H2 gas
Enter the H2 gas flow rate and click the [Apply] button.
3rd Cell Gas
Enter the percentage of the 3rd Cell Gas and click the [Apply] button.
4th Cell Gas
Enter the percentage of the 4th cell gas and click the [Apply] button.
3rd Cell Gas: Helium content of gas mix must be 90% or more; For example: NH3/He mix, He content must be equal to or greater than 90%; Even if introducing a non-corrosive non-flammable gas to the 3rd cell, it still must be diluted with 90% or more Helium.
4th Cell Gas: Use only non-flammable non-corrosive gas.
For important information and precautions on the handling and use of compressed gases (including oxygen, hydrogen and ammonia) refer to the Hardware Maintenance Manual, Ammonia Safety Guide, Hydrogen Safety Guide and Site Preparation Guide.
[Print]
Prints the result.
[Close]
Closes the dialog box.