Set the suitable flow rate of the reactive gas by sweeping the reaction gas flow rate.
Scan Type
Select a scan type.
[MS/MS]: Performs an MS/MS scan. When this type is selected, the [Q1] and [Q2] columns are displayed on the concentration table and masses are displayed in each column.
[Single Quad]: Performs a Single Quad scan.
Unit
Select a unit for concentrations.
Setup Table
Mark the check boxes for the gasses and enter the minimum and maximum values of the flow rate and the step and fixed gas flow rate.
Solution
Set the vial positions of the blank solution and standard solution, and stabilization time.
Concentration Table
Enter the concentration of each acquired mass contained in the standard solution.
When [MS/MS] is selected for [Scan Type], the [Q1] and [Q2] columns are displayed and masses are displayed in each column.
[Ramp]
Measures the count value by ramping the gas flow rate from the minimum value to the maximum value.
[Show Result]
The [Ramp Cell Gas Result] dialog box appears and displays the result.
[Close]
Cancels the data acquisition.