Configure the processes for doing a rinse at the end of a batch.
Probe Rinse (Sample)
After the acquisition of samples, enter the rinse time for the probe at the rinse port and the pump speed.
Probe Rinse (Std)
After the acquisition of the standard solution, enter the rinse time for the probe at the rinse port and the pump speed.
Rinse1
Enter the rinse time, pump speed, and vial position for the external bottle 1.
Probe Rinse1
After Rinse1, enter the rinse time for the probe at the rinse port and the pump speed.
Rinse2
Enter the rinse time, pump speed, and vial position for the external bottle 2.
Probe Rinse1
After Rinse2, enter the rinse time for the probe at the rinse port and the pump speed.
Rinse3
Enter the rinse time, pump speed, and vial position for the external bottle 3.
Probe Rinse3
After Rinse3, enter the rinse time for the probe at the rinse port and the pump speed.
Rinse4
This item is displayed when General] is selected in the [Sample Introduction] List.
Enter the rise time, pump speed, and vial position for the external bottle 4.
Probe Rinse4
This item is displayed when General] is selected in the [Sample Introduction] List.
After Rinse4, enter the probe rinse time at the rinse port and the pump speed.
[OK]
Applies the settings.
[Cancel]
Cancels the settings.