[Autocalibration Assistant] dialog box

Select the stock solution being used for acquisition and set the level dilution factor. The settings you make are automatically applied to the Calibration table on the Calibration pane.

Displays the [Stock Standards Library] dialog box. You can edit the stock solution being used. You can also create user-defined stock solutions. Click to return to this dialog box.

[Solution]

Select the name of the stock solution used for the acquisition.

[Concentration unit]

Select the concentration units for the stock solution.

Stock Solutions table

Displays the name of each stock solution and the concentration of the elements contained.

[Dilution factor to Level]

Sets up the stock solution and dilution factor for each level.

[Apply]

Applies the settings to the calibration table on the Calibration pane.

[Cancel]

Discards your settings and closes the dialog box.

Context Menu

[Export Table]

Opens the [Export Table] (Entire Table) dialog box where you can export the entire table.

[Export Selected Area]

Opens the [Export Table] (Area) dialog box where you can export the data selected in the table. This command is available when a range of cells in the table is selected.

[Copy]

Copies the selected row, column, or cell to the Clipboard.

[Paste]

Pastes the copied data to the cursor position.

To Get Here

• Click [Autocalibration Assistant] from the toolbar on the Instrument Control Calibration pane.

• Click [Autocalibration Assistant] from the toolbar on the Data Analysis Calibration pane.

See Also

• Calibration pane

• [Stock Standards Library] dialog box

• The Instrument Control Settings dialog box

• The Data Analysis Settings dialog box