Set the items for the Performance check and the criteria.
The performance report result is compared with the limit values set in this dialog box after executing the Performance Report. The comparisons are made, and the results are saved as results in the Performance Report.
If the Performance check fails, a pop-up is displayed with a maintenance recommendation.
[Check Sensitivity] check box
Select this to perform a sensitivity check.
[Tune Solution Conc.]
Enter the tune solution conc. used in the Performance Report.
[Monitor] column
Select the mass used in the Performance Report.
[Channel] column
Displays the channel specified in [Monitored Masses] in [Standard Setting] in the Startup Pane.
[Lower Limit] column
Enter a lower limit for the Performance check.
[Reset] column
You can reset limit values to their defaults.
[Check Oxide Ratio] check box
Select this to perform an oxide ratio check.
[Maximum %] column
Enter the maximum value for the Performance check.
[Reset] column
You can reset limit values to their defaults.
[Check Doubly Charged] check box
Select this to perform a doubly charged ion check.
[Maximum %] column
Enter the maximum value for the Performance check.
[Reset] column
You can reset limit values to their defaults.
<OK>
Applies the settings.
<Cancel>
Cancels the settings.