Executing the Queue

To start a data acquisition, complete the following steps:

1. Create a batch as described in "Creating a Batch", and then click [Add to Queue] from the [Batch] group on the [Home] tab.

   The configured batch is added in Queue and the analysis starts automatically.

   • The Acquisition Queue Pane displays the details and results of each task.
   • The Sample List Pane (Queue) displays the sample list that is running.
   • The Real Time Display Pane displays the signal in real time.

    

2. When the analysis is complete, put the instrument in Standby mode.

   For more information, refer to "Putting the Instrument in Standby Mode".